Overview
WE935B00 module from Wi2Wi's EM series is a best in class single-band (2.4GHz) high performance embedded Wi-Fi module. This highly integrated plug and play, embedded wifi module with chip antenna and u.FL connector includes dedicated microcontroller, MAC, baseband, RF transceiver, power amplifier, crystal, Tx/Rx switch, filter and OTP memory for calibration data and MAC address. WE935B00 (serial to wifi module) is a complete wireless subsystem in a small form factor, featuring full 802.11 b/g/n capabilities with embedded Wireless LAN (WLAN) stack, supplicant and TCP/IP stack. By completely off-loading the external Microcontroller (MCU) from wireless activities, user can dedicate the external host for application development and significantly reduce their time to market and R&D cost. This WLAN module supports UART, SPI and USB host interfaces and comes in various operating temperatures and certified to FCC, CE and IC.
Features
- Small footprint: 15 mm x 16.5 mm x 1.86 mm
- Compliant to IEEE 802.11b/g/n Wi-fi, 1x1 SISO
- 20 MHz Channel Bandwidth
- High Throughput up to 5 Mbps on UART and 15Mbps on SPI
- UART hardware flow control
- Support for Station/Client Mode, Access Point Mode, and Wi-Fi Direct Mode
- Embedded all the protocol and configuration functions required for WLAN Link setup and TCP/IP communication
- Supports open, WPA/WPA2-PSK, and WEP security modes
- Supports 10 TCP/IP sockets
- Onboard chip Antenna + u.Fl Connector
- Support for Antenna Diversity
- Maximum transmit power up to 18 dBm
- Single power supply operation, 3.3V DC
- Available in industrial (-40℃ to +85℃), extended (-30℃ to +85℃) and commercial (0℃ to +70℃) operating temperature variants
Applications
- IoT (Internet of Things)
- IIoT (Industrial Internet of Things)
- M2M (Machine-to-Machine)
- Serial-to-Wifi
- Internet enabled consumer devices
- Wireless Consumer Appliances
- Wi-Fi enabled security cameras
- Home audio/video system
- Automotive aftermarket
- Warehousing and logistics handhelds
- Medical monitoring equipment
- Industrial Sensor controller
- Smart homes
- Smart energy
- Data logger
- Industrial Sensor controller
- Wi-Fi Bridge
Specifications
Wi-Fi IEEE 802.11: | b/g/n, Single-Band (2.4GHz) |
Available Channels: | Channels 1-13 |
Channel Bandwidth: | 20 MHz |
802.11b Data Rates: | DSSS Modulation: 1 and 2 Mbps CCK Modulation: 5.5 and 11 Mbps |
802.11g Data Rates: | OFDM Modulation: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps |
802.11n Data Rates: | MCS0-MCS7 (up to 72.2 Mbps) |
Other 802.11 Features: | 802.11d/e/h/i/k/r/w |
Maximum Transmit Power: | 18 dBm |
Receive Sensitivity: | -97 dBm |
Ordering
Part Order Number | Description | Antenna | Operating Temperature | Packaging Type | Buy from Distributor |
---|---|---|---|---|---|
WE935B00-I3QT | Module | Chip + u.Fl | (-40°C to +85°C) | Tray | Buy Now |
WE935B00-E3QT | Module | Chip + u.Fl | (-30°C to +85°C) | Tray | Buy Now |
WE935B00-C3QT | Module | Chip + u.Fl | (0°C to +70°C) | Tray | Buy Now |
WE935B00-I3QR | Module | Chip + u.Fl | (-40°C to +85°C) | Reel | Buy Now |
WE935B00-E3QR | Module | Chip + u.Fl | (-30°C to +85°C) | Reel | Buy Now |
WE935B00-C3QR | Module | Chip + u.Fl | (0°C to +70°C) | Reel | Buy Now |
WE935B00-EVK3 | WE935B00-I3 Module on Evaluation Kit | Chip + u.Fl + Rubber Duck with u.Fl connector cable | (-40°C to +85°C) | Kit | Buy Now |
WE935B00-DVK3 | WE935B00-EVK3 and i.MX6 Development Platform with all needed Software for application development | Chip + u.Fl + Rubber Duck with u.Fl connector cable | (-40°C to +85°C) | Kit | Buy Now |